Modern cars all come with an impressive amount of features, but, by reason of your budget or the year of your Suzuki Jimny, you may not be lucky enough to have them all. Today we’re gonna help you resolve this concern by detailing how to install parking sensor on my Suzuki Jimny? In reality, this feature is very handy, particularly if you live in the city and have to park often in narrow parking spots. To help you out, we’ll first look at how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Suzuki Jimny, and at last, how much does a parking sensor cost?

install-parking-sensors-suzuki-jimny

How does parking sensors function on an Suzuki Jimny?

So we begin with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature permits you to know the distance between the back of your Suzuki Jimny and an obstacle when you maneuver. It is therefore especially logical for drivers who have to maneuver frequently, whose field of vision is mediocre, or whose car size is big.
Frequently installed as standard, the reverse sensors of a Suzuki Jimny is made up of a kit of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in strength with the proximity of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Suzuki Jimny will help you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Suzuki Jimny?

We now advance to the part that you are quite likely most interested in, fitting reverse parking sensors on a Suzuki Jimny. This section is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Suzuki Jimny.

How to replace a broken backup sensors on a Suzuki Jimny

First we’ll see how to replace a broken parking sensor on an Suzuki Jimny. In cases where your Suzuki Jimny has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function correctly. Thankfully for you this procedure is very simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Suzuki Jimny, this part is extremely intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning correctly.
  • How to install an aftermarket parking sensor kit on an Suzuki Jimny

    Now we go forward to the section you’re likely most interested in, how to install a reverse sensor set up on a Suzuki Jimny that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now deal automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Suzuki Jimny for the set up, do not be reluctant to consult our document on this subject to learn the process to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation instructions, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Suzuki Jimny

      And at last, we will now present you the installation of a drill-free parking sensors system on a Suzuki Jimny. There are two kind, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation owners manual which is accessible with some electrical bases.
      • Identify the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Suzuki Jimny?

        Price of changing a broken reversing parking sensor for an Suzuki Jimny

        The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Suzuki Jimny

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable package.

        Price of a parking sensors kit without drilling for a Suzuki Jimny

        .
        At last, for the price of a reversing radar without drilling for your Suzuki Jimny, no matter what type you choose, you will have to spend between 30 and 60 euros.

        If you wish more tutorials on the Suzuki Jimny, go to our Suzuki Jimny category.