Recent cars all come with an impressive amount of options, but, due to your budget or the year of your Nissan Leaf, you may not be sufficiently fortunate to have them all. On this page we’re going to help you correct this problem by explaining how to install parking sensor on my Nissan Leaf? In fact, this feature is extremely efficient, especially if you live in the city and have to park your car on the regular basis in narrow parking spots. To help you out, we’ll first look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Nissan Leaf, and to finish, how much does a parking sensor cost?

install-parking-sensors-nissan-leaf

How does parking sensors function on an Nissan Leaf?

So we commence with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Nissan Leaf and an obstacle when you maneuver. It is consequently particularly good for persons who have to maneuver on a regular basis, whose visibility is bad, or whose vehicle size is huge.
Nearly always installed as standard, the reverse sensors of a Nissan Leaf include a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will enhance in strength with the closeness of the obstacle and in some cases a visual sign in complement. The reversing radars of a Nissan Leaf will enable you for parking, but also for security and keeping away from pedestrians.

How to install parking sensors on a Nissan Leaf?

We now proceed to the section that you are likely most interested in, installing reverse parking sensors on a Nissan Leaf. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Nissan Leaf.

How to change a faulty backup sensors on a Nissan Leaf

First we’ll see how to change a faulty parking sensor on an Nissan Leaf. If it turns out your Nissan Leaf has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function correctly. Fortunately for you this procedure is particularly simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Nissan Leaf, this part is fairly intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Nissan Leaf

    Now we proceed to the part you’re almost certainly most interested in, how to install a reverse sensor set up on a Nissan Leaf that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Nissan Leaf for the installation, do not hesitate to consult our article content on this subject to discover the method to follow. If you don’t feel like it, you can call a professional, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation guidelines, but we summarize here the main basic steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Nissan Leaf

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Nissan Leaf. There are two sort, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical knowledges.
      • Locate the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Nissan Leaf?

        Price of changing a faulty reversing parking sensor for an Nissan Leaf

        The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Nissan Leaf

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Nissan Leaf

        .
        To conclude, for the price of a reversing radar without drilling for your Nissan Leaf, no matter what type you go for, you will have to pay between 30 and 60 euros.

        If you need more guides on the Nissan Leaf, go to our Nissan Leaf category.