Modern cars all come with an impressive quantity of technology, but, due to your budget or the year of your Mercedes Classe E 4, you may not be sufficiently lucky to have them all. On this page we’re gonna help you correct this concern by telling you how to install parking sensor on my Mercedes Classe E 4? Indeed, this feature is highly practical, particularly if you live in the city and have to park regularly in narrow parking spaces. To help you out, we’ll first examine how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Mercedes Classe E 4, and to finish, how much does a parking sensor cost?
How does parking sensors work on an Mercedes Classe E 4?
So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Mercedes Classe E 4 and an obstacle when you move back. It is therefore mainly logical for drivers who have to maneuver frequently, whose visibility is bad, or whose vehicle size is large.
In many cases fitted as standard, the reverse sensors of a Mercedes Classe E 4 incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will increase in level with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Mercedes Classe E 4 will enable you for parking, but as well for safety and staying away from pedestrians.
How to install parking sensors on a Mercedes Classe E 4?
We now advance to the part that you are most likely most intrigued by, installing reverse parking sensors on a Mercedes Classe E 4. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Mercedes Classe E 4.
How to replace a broken backup sensors on a Mercedes Classe E 4
First we’ll see how to replace a broken parking sensor on an Mercedes Classe E 4. If it turns out your Mercedes Classe E 4 has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function correctly. Fortunately for you this operation is really simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Remove the damaged parking sensor from your Mercedes Classe E 4, this part is very intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating correctly.
- You will only need to adhere to the installation instructions, but we summarize here the main guidelines.
- Remove the bumper if you don’t have access to the inside of it.
- Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Give it a try all out.
- Stick to the installation manual which is accessible with some electrical knowledges.
- Locate the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Mercedes Classe E 4
Now we move on to the section you’re quite likely most intrigued by, how to install a reverse sensor set up on a Mercedes Classe E 4 that doesn’t have one? As we said early on, you’re lucky because a good number of OEMs now deal aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your Mercedes Classe E 4 for the installation, do not be reluctant to browse our content page on this subject to discover the method to follow. If you don’t feel like it, you can call a workshop, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mercedes Classe E 4
And to finish, we will now present you the installation of a drill-free parking sensors system on a Mercedes Classe E 4. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Mercedes Classe E 4?
Price of replacing a broken reversing parking sensor for an Mercedes Classe E 4
The replacement of a destroyed reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a workshop.
Price of an ultrasonic parking sensors with drilling for Mercedes Classe E 4
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class set up.
Price of a parking sensors kit without drilling for a Mercedes Classe E 4
.
At last, for the price of a reversing radar without drilling for your Mercedes Classe E 4, whatever type you go for, you will have to pay between 30 and 60 euros.
If you need more guides on the Mercedes Classe E 4, go to our Mercedes Classe E 4 category.
