Modern cars all come with an incredible number of features, but, by reason of your budget or the year of your Mercedes Classe Cls, you may not be fortunate enough to have them all. Today we’re going to help you resolve this issue by detailing how to install parking sensor on my Mercedes Classe Cls? In reality, this option is highly handy, particularly if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Mercedes Classe Cls, and to finish, how much does a parking sensor cost?
How does parking sensors function on an Mercedes Classe Cls?
So we start with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Mercedes Classe Cls and an obstacle when you move back. It is as a consequence especially legitimate for drivers who have to maneuver regularly, whose field of vision is bad, or whose vehicle size is big.
Often times installed as standard, the reverse sensors of a Mercedes Classe Cls include a set of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will enhance in level with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Mercedes Classe Cls will help you for parking, but also for security and keeping away from pedestrians.
How to install parking sensors on a Mercedes Classe Cls?
We now advance to the step that you are likely most focused on, fitting reverse parking sensors on a Mercedes Classe Cls. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Mercedes Classe Cls.
How to change a defective backup sensors on a Mercedes Classe Cls
First we’ll see how to change a defective parking sensor on an Mercedes Classe Cls. In the event that your Mercedes Classe Cls has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to let the system to function correctly. Thankfully for you this operation is particularly simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take out the broken parking sensor from your Mercedes Classe Cls, this part is extremely intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating correctly.
- You will just need to adhere to the installation guidelines, but we summarize here the main simple steps.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Test it all out.
- Stick to the installation manual which is accessible with some electrical bases.
- Determine the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Mercedes Classe Cls
Now we advance to the section you’re quite likely most focused on, how to install a reverse sensor set up on a Mercedes Classe Cls that doesn’t have one? As we said above, you’re lucky because many of OEMs now deal aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Mercedes Classe Cls for the set up, do not be reluctant to read our content on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Mercedes Classe Cls
And to finish, we will now present you the installation of a drill-free parking sensors system on a Mercedes Classe Cls. There are two types, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Mercedes Classe Cls?
Price of swapping a defective reversing parking sensor for an Mercedes Classe Cls
The replacement of a destroyed reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Mercedes Classe Cls
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class system.
Price of a parking sensors kit without drilling for a Mercedes Classe Cls
.
To finish, for the price of a reversing radar without drilling for your Mercedes Classe Cls, whatever version you select, you will have to spend between 30 and 60 euros.
If you need more guides on the Mercedes Classe Cls, go to our Mercedes Classe Cls category.
