Recent cars all come with an impressive quantity of features, nevertheless, due to your budget or the year of your Ford Puma, you may not be sufficiently fortunate to have them all. Today we’re going to help you resolve this situation by telling you how to install parking sensor on my Ford Puma? In reality, this option is highly practical, particularly if you live in the city and have to park your car often in narrow parking spots. To help you out, we’ll first look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Ford Puma, and at last, how much does a parking sensor cost?

install-parking-sensors-ford-puma

How does parking sensors work on an Ford Puma?

So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Ford Puma and an obstacle when you maneuver. It is as a result mainly logical for owners who have to maneuver frequently, whose visibility is poor, or whose vehicle size is big.
In many cases fitted as standard, the reverse sensors of a Ford Puma incorporate a kit of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in intensity with the closeness of the obstacle and in some cases a visual sign in complement. The reversing radars of a Ford Puma will enable you for parking, but as well for security and avoiding pedestrians.

How to install parking sensors on a Ford Puma?

We now go forward to the section that you are quite likely most focused on, fitting reverse parking sensors on a Ford Puma. This part is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Ford Puma.

How to replace a malfunctioning backup sensors on a Ford Puma

First we’ll see how to replace a malfunctioning parking sensor on an Ford Puma. In the event that your Ford Puma has suffered a rear shock and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function properly. Fortunately for you this process is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Ford Puma, this stage is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Ford Puma

    Now we proceed to the part you’re almost certainly most focused on, how to install a reverse sensor set up on a Ford Puma that doesn’t have one? As we mentioned earlier on, you’re lucky because many of OEMs now offer auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Ford Puma for the installation, do not hesitate to consult our content page on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation recommendations, but we summarize here the main basic steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Ford Puma

      And at last, we will now present you the installation of a drill-free parking sensors system on a Ford Puma. There are two sort, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical knowledges.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Ford Puma?

        Price of changing a malfunctioning reversing parking sensor for an Ford Puma

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count around one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Ford Puma

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class kit.

        Price of a parking sensors kit without drilling for a Ford Puma

        .
        To conclude, for the price of a reversing radar without drilling for your Ford Puma, what ever type you go for, you will have to spend between 30 and 60 euros.

        To get more tips on the Ford Puma, take a look at the Ford Puma category.