Recent cars all come with an impressive number of technology, but, resulting from your budget or the year of your Ford Edge, you may not be sufficiently fortunate to have them all. Today we’re going to help you correct this situation by detailing how to install parking sensor on my Ford Edge? Indeed, this feature is very efficient, particularly if you live in the city and have to park regularly in narrow parking places. To help you out, we’ll first look at how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Ford Edge, and to finish, how much does a parking sensor cost?
How does parking sensors operate on an Ford Edge?
So we begin with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature permits you to know the distance between the back of your Ford Edge and an obstacle when you move back. It is as a result especially legitimate for people who have to maneuver on a regular basis, whose field of vision is bad, or whose vehicle size is big.
Nearly always installed as standard, the reverse sensors of a Ford Edge integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will rise in intensity with the proximity of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Ford Edge will help you for parking, but also for security and avoiding pedestrians.
How to install parking sensors on a Ford Edge?
We now go forward to the step that you are likely most intrigued by, fitting reverse parking sensors on a Ford Edge. This part is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Ford Edge.
How to replace a defective backup sensors on a Ford Edge
First we’ll see how to replace a defective parking sensor on an Ford Edge. If it turns out your Ford Edge has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function properly. Good thing for you this procedure is particularly simple, you can even carry it out yourself without any specified mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the damaged parking sensor from your Ford Edge, this part is extremely intuitive, it is just clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating properly.
- You will simply need to follow the installation instructions, but we summarize here the main procedures.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Adhere to the installation instructions which is accessible with some electrical bases.
- Identify the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Ford Edge
Now we advance to the part you’re most certainly most intrigued by, how to install a reverse sensor set up on a Ford Edge that doesn’t have one? As we explained early on, you’re lucky because many of OEMs now sell aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these versions in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will certainly have to remove the bumper of your Ford Edge for the set up, do not be reluctant to consult our content on this subject matter to learn the process to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Ford Edge
And to finish, we will now present you the installation of a drill-free parking sensors system on a Ford Edge. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Ford Edge?
Price of swapping a defective reversing parking sensor for an Ford Edge
The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Ford Edge
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality package.
Price of a parking sensors kit without drilling for a Ford Edge
.
To finish, for the price of a reversing radar without drilling for your Ford Edge, whatever version you go for, you will have to spend among 30 and 60 euros.
Whenever you have any further questions about the Ford Edge, do not hesitate to consult our Ford Edge category.
