Recent cars all come with an impressive amount of features, however, because of your budget or the year of your Fiat Stilo, you may not be sufficiently fortunate to have them all. In this article we’re going to help you resolve this trouble by detailing how to install parking sensor on my Fiat Stilo? In fact, this option is highly practical, particularly if you live in the city and have to park habitually in narrow parking places. To help you out, we’ll first look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Fiat Stilo, and to finish, how much does a parking sensor cost?

install-parking-sensors-fiat-stilo

How does parking sensors function on an Fiat Stilo?

So we begin with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option enables you to know the distance between the back of your Fiat Stilo and an obstacle when you maneuver. It is consequently specifically legitimate for persons who have to maneuver frequently, whose field of vision is bad, or whose vehicle size is large.
Often installed as standard, the reverse sensors of a Fiat Stilo incorporate a set of sensors (minimum 4) that will be turned on with reverse gear and will identify obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will increase in strength with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Fiat Stilo will enable you for parking, but as well for security and staying away from pedestrians.

How to install parking sensors on a Fiat Stilo?

We now advance to the step that you are most certainly most interested in, installing reverse parking sensors on a Fiat Stilo. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Fiat Stilo.

How to change a broken backup sensors on a Fiat Stilo

First we’ll see how to change a broken parking sensor on an Fiat Stilo. In cases where your Fiat Stilo has suffered a rear shock and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function properly. Fortunately for you this operation is extremely simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Fiat Stilo, this stage is very intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating properly.
  • How to install an aftermarket parking sensor kit on an Fiat Stilo

    Now we move on to the part you’re quite likely most interested in, how to install a reverse sensor set up on a Fiat Stilo that doesn’t have one? As we revealed earlier on, you’re lucky because many of OEMs now provide automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Fiat Stilo for the set up, do not hesitate to read our article on this subject to discover the procedure to follow. If you don’t feel like it, you can call a workshop, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation instructions, but we summarize here the main simple steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Fiat Stilo

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Fiat Stilo. There are two sort, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation owners manual which is accessible with some electrical bases.
      • Locate the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Fiat Stilo?

        Price of changing a broken reversing parking sensor for an Fiat Stilo

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Fiat Stilo

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality set up.

        Price of a parking sensors kit without drilling for a Fiat Stilo

        .
        To conclude, for the price of a reversing radar without drilling for your Fiat Stilo, no matter what version you go for, you will have to spend between 30 and 60 euros.

        In the event that you have any additional questions about the Fiat Stilo, do not hesitate to consult our Fiat Stilo category.