Modern cars all come with an impressive quantity of features, nevertheless, because of your budget or the year of your Fiat Idea, you may not be fortunate enough to have them all. Today we’re going to help you resolve this concern by explaining how to install parking sensor on my Fiat Idea? In fact, this feature is highly practical, especially if you live in the city and have to park frequently in narrow parking places. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Fiat Idea, and finally, how much does a parking sensor cost?

install-parking-sensors-fiat-idea

How does parking sensors operate on an Fiat Idea?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature allows you to know the distance between the back of your Fiat Idea and an obstacle when you maneuver. It is as a consequence especially honest for people who have to maneuver frequently, whose visibility is awful, or whose vehicle size is large.
Nearly always fitted as standard, the reverse sensors of a Fiat Idea consist of a kit of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will increase in strength with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Fiat Idea will enable you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Fiat Idea?

We now proceed to the part that you are probably most excited about, fitting reverse parking sensors on a Fiat Idea. This section is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Fiat Idea.

How to replace a malfunctioning backup sensors on a Fiat Idea

First we’ll see how to replace a malfunctioning parking sensor on an Fiat Idea. In cases where your Fiat Idea has suffered a rear collision and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function correctly. Luckily for you this operation is very simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Fiat Idea, this part is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working correctly.
  • How to install an aftermarket parking sensor kit on an Fiat Idea

    Now we proceed to the section you’re likely most excited about, how to install a reverse sensor set up on a Fiat Idea that doesn’t have one? As we said earlier, you’re lucky because many of OEMs now sell automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Fiat Idea for the installation, do not be reluctant to read our article content on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a professional, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to follow the installation instructions, but we summarize here the main basic steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Fiat Idea

      And finally, we will now present you the installation of a drill-free parking sensors system on a Fiat Idea. There are two types, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical knowledges.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Fiat Idea?

        Price of replacing a malfunctioning reversing parking sensor for an Fiat Idea

        The replacement of a damaged reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Fiat Idea

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality kit.

        Price of a parking sensors kit without drilling for a Fiat Idea

        .
        At last, for the price of a reversing radar without drilling for your Fiat Idea, whatever version you go for, you will have to pay between 30 and 60 euros.

        If you wish more tutorials on the Fiat Idea, go to our Fiat Idea category.