Recent cars all come with an incredible number of technology, nevertheless, by reason of your budget or the year of your Fiat Doblo, you may not be lucky enough to have them all. In this article we’re going to help you correct this situation by explaining how to install parking sensor on my Fiat Doblo? Indeed, this option is extremely profitable, particularly if you live in the city and have to park your car habitually in narrow parking spaces. To help you out, we’ll first examine how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Fiat Doblo, and to finish, how much does a parking sensor cost?

install-parking-sensors-fiat-doblo

How does parking sensors work on an Fiat Doblo?

So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Fiat Doblo and an obstacle when you maneuver. It is as a consequence specifically honest for people who have to maneuver often, whose visibility is poor, or whose vehicle size is big.
Often fitted as standard, the reverse sensors of a Fiat Doblo consist of a kit of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will rise in level with the closeness of the obstacle and sometimes a visual sign in complement. The reversing radars of a Fiat Doblo will help you for parking, but as well for security and keeping away from pedestrians.

How to install parking sensors on a Fiat Doblo?

We now advance to the section that you are likely most excited about, fitting reverse parking sensors on a Fiat Doblo. This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Fiat Doblo.

How to replace a malfunctioning backup sensors on a Fiat Doblo

First we’ll see how to replace a malfunctioning parking sensor on an Fiat Doblo. In cases where your Fiat Doblo has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to let the system to function properly. Good thing for you this operation is very simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Fiat Doblo, this part is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Fiat Doblo

    Now we go forward to the part you’re almost certainly most excited about, how to install a reverse sensor set up on a Fiat Doblo that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Fiat Doblo for the set up, do not be reluctant to read our content page on this subject to learn the procedure to follow. If you don’t feel like it, you can call a professional, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation recommendations, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a Fiat Doblo

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Fiat Doblo. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation owners manual which is accessible with some electrical bases.
      • Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Fiat Doblo?

        Price of changing a malfunctioning reversing parking sensor for an Fiat Doblo

        The replacement of a destroyed reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is required to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Fiat Doblo

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable kit.

        Price of a parking sensors kit without drilling for a Fiat Doblo

        .
        Finally, for the price of a reversing radar without drilling for your Fiat Doblo, whatever type you choose, you will have to pay among 30 and 60 euros.

        If you need more guides on the Fiat Doblo, go to our Fiat Doblo category.