Recent cars all come with an incredible amount of features, however, resulting from your budget or the year of your Bmw Serie 6, you may not be lucky enough to have them all. On this page we’re going to help you resolve this trouble by explaining how to install parking sensor on my Bmw Serie 6? Indeed, this feature is extremely handy, especially if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first view how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Bmw Serie 6, and at last, how much does a parking sensor cost?

install-parking-sensors-bmw-serie-6

How does parking sensors function on an Bmw Serie 6?

So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature permits you to know the distance between the back of your Bmw Serie 6 and an obstacle when you maneuver. It is consequently extremely logical for persons who have to maneuver on a regular basis, whose field of vision is poor, or whose vehicle size is huge.
In many cases fitted as standard, the reverse sensors of a Bmw Serie 6 incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will rise in level with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Bmw Serie 6 will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Bmw Serie 6?

We now advance to the step that you are almost certainly most intrigued by, fitting reverse parking sensors on a Bmw Serie 6. This section is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Bmw Serie 6.

How to replace a broken backup sensors on a Bmw Serie 6

First we’ll see how to replace a broken parking sensor on an Bmw Serie 6. In the event that your Bmw Serie 6 has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function correctly. Thankfully for you this procedure is particularly simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Bmw Serie 6, this step is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Bmw Serie 6

    Now we go forward to the section you’re likely most intrigued by, how to install a reverse sensor set up on a Bmw Serie 6 that doesn’t have one? As we mentioned earlier, you’re lucky because a good number of OEMs now provide aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Bmw Serie 6 for the set up, do not be reluctant to consult our article content on this subject to discover the procedure to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation instructions, but we summarize here the main steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Bmw Serie 6

      And at last, we will now present you the installation of a drill-free parking sensors system on a Bmw Serie 6. There are two types, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical knowledges.
      • Determine the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Bmw Serie 6?

        Price of changing a broken reversing parking sensor for an Bmw Serie 6

        The replacement of a destroyed reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Bmw Serie 6

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Bmw Serie 6

        .
        At last, for the price of a reversing radar without drilling for your Bmw Serie 6, whatever type you choose, you will have to pay between 30 and 60 euros.

        If you wish more guides on the Bmw Serie 6, go to our Bmw Serie 6 category.