Recent cars all come with an impressive amount of features, however, resulting from your budget or the year of your Bmw Serie 1 F21, you may not be sufficiently lucky to have them all. Today we’re going to help you correct this concern by explaining how to install parking sensor on my Bmw Serie 1 F21? In reality, this feature is extremely efficient, particularly if you live in the city and have to park your car frequently in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Bmw Serie 1 F21, and at last, how much does a parking sensor cost?

install-parking-sensors-bmw-serie-1-f21

How does parking sensors work on an Bmw Serie 1 F21?

So we begin with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Bmw Serie 1 F21 and an obstacle when you move back. It is as a result specifically legitimate for owners who have to maneuver on a regular basis, whose visibility is awful, or whose car size is big.
Nearly always fitted as standard, the reverse sensors of a Bmw Serie 1 F21 is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. Ordinarily you will have a sound warning in the cabin which will enhance in intensity with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Bmw Serie 1 F21 will enable you for parking, but also for security and staying away from pedestrians.

How to install parking sensors on a Bmw Serie 1 F21?

We now move on to the section that you are likely most focused on, installing reverse parking sensors on a Bmw Serie 1 F21. This section is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Bmw Serie 1 F21.

How to change a faulty backup sensors on a Bmw Serie 1 F21

First we’ll see how to change a faulty parking sensor on an Bmw Serie 1 F21. In cases where your Bmw Serie 1 F21 has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function effectively. Luckily for you this operation is really simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the broken parking sensor from your Bmw Serie 1 F21, this part is very intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Bmw Serie 1 F21

    Now we proceed to the section you’re most certainly most focused on, how to install a reverse sensor set up on a Bmw Serie 1 F21 that doesn’t have one? As we revealed earlier, you’re lucky because many of OEMs now sell automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Bmw Serie 1 F21 for the installation, do not hesitate to browse our content page on this subject matter to discover the process to follow. If you don’t feel like it, you can call a mechanic, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to follow the installation recommendations, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Bmw Serie 1 F21

      And at last, we will now present you the installation of a drill-free parking sensors system on a Bmw Serie 1 F21. There are two sort, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical bases.
      • Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Bmw Serie 1 F21?

        Price of changing a faulty reversing parking sensor for an Bmw Serie 1 F21

        The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Bmw Serie 1 F21

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality system.

        Price of a parking sensors kit without drilling for a Bmw Serie 1 F21

        .
        To finish, for the price of a reversing radar without drilling for your Bmw Serie 1 F21, whatever version you choose, you will have to spend among 30 and 60 euros.

        If you have any further questions about the Bmw Serie 1 F21, do not hesitate to consult our Bmw Serie 1 F21 category.