You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your smartphone is loaded with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve created this article content to help you, because now you’re going to find out how to install a car radio on your Volvo XC60. To do this, initially we will see how to remove the old car radio, then how to install a car radio on Volvo XC60 and finally, how to connect it.
How to install car radio on Volvo XC60: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volvo XC60, there is one necessary task, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two techniques dependant upon the stereo that equips your Volvo XC60:
- Original car radio:
In this case, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Volvo XC60. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volvo XC60: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Volvo XC60. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Volvo XC60, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volvo XC60, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volvo XC60, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the Volvo XC60, do not hesitate to consult our Volvo XC60 category.
