You’re tired of listening to cassettes and only having the capacity to enjoy the radio, while your phone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve made this content page to help you, because now you’re going to find out how to install a car radio on your Toyota Camry. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Toyota Camry and finally, how to connect it.
How to install car radio on Toyota Camry: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Toyota Camry, there is one imperative task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two solutions according to the stereo that equips your Toyota Camry:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Toyota Camry. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Camry: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Toyota Camry. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Toyota Camry, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Camry, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Camry, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Toyota Camry, take a look at the Toyota Camry category.
