You’re bored with listening to cassettes and only having the ability to enjoy the radio, while your phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written and published this article content to help you, because in this article you’re going to find out how to install a car radio on your Suzuki Jimny. To accomplish this, initially we will find out how to remove the old car radio, then how to install a car radio on Suzuki Jimny and finally, how to connect it.
How to install car radio on Suzuki Jimny: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Suzuki Jimny, there is one important task, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two methods based on the stereo that equips your Suzuki Jimny:
- Original car radio:
In this case, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Suzuki Jimny. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Suzuki Jimny: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Suzuki Jimny. Beforehand, spend some time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Suzuki Jimny, once installed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Suzuki Jimny, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Suzuki Jimny, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Suzuki Jimny, take a look at the Suzuki Jimny category.
