You’re tired of listening to cassettes and only being able to listent to the radio, while your smart phone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve written this content to help you, because right now you’re going to learn about how to install a car radio on your saab 9 3. To get this done, first we will find out how to remove the old car radio, then how to install a car radio on saab 9 3 and finally, how to connect it.
How to install car radio on saab 9 3: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your saab 9 3, there is one essential step, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two options according to the stereo that equips your saab 9 3:
- Original car radio:
In cases like this, you’ll have to be patient, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your saab 9 3. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your saab 9 3: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your saab 9 3. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your saab 9 3, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your saab 9 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on saab 9 3, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the saab 9 3, take a look at the saab 9 3 category.
