You’re bored with listening to cassettes and only having the ability to enjoy the radio, while your phone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written and published this article to help you, because in this article you’re going to learn about how to install a car radio on your Renault Megane 2. To accomplish this, initially we will see how to remove the old car radio, then how to install a car radio on Renault Megane 2 and finally, how to connect it.
How to install car radio on Renault Megane 2: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Renault Megane 2, there is one necessary step, remove the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two ways determined by the stereo that equips your Renault Megane 2:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Renault Megane 2. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Megane 2: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Renault Megane 2. Before you start, spend some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Renault Megane 2, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Megane 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Renault Megane 2, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
In the event that you have any additional questions about the Renault Megane 2, do not hesitate to consult our Renault Megane 2 category.
