You’re uninterested in listening to cassettes and only having the capability to enjoy the radio, while your smartphone is loaded with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve created this content to help you, because in this article you’re going to find out how to install a car radio on your Renault Laguna 3. To get this done, initially we will discover how to remove the old car radio, then how to install a car radio on Renault Laguna 3 and finally, how to connect it.
How to install car radio on Renault Laguna 3: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Renault Laguna 3, there is one imperative task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two techniques according to the stereo that equips your Renault Laguna 3:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Renault Laguna 3. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Laguna 3: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Renault Laguna 3. Ahead of time, take some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Renault Laguna 3, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Laguna 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Renault Laguna 3, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you have any additional questions about the Renault Laguna 3, do not hesitate to consult our Renault Laguna 3 category.
