You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smart phone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve created this article to help you, because in this article you’re going to learn about how to install a car radio on your Renault Captur. To make this happen, first we will discover how to remove the old car radio, then how to install a car radio on Renault Captur and to finish, how to connect it.
How to install car radio on Renault Captur: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Renault Captur, there is one fundamental task, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two techniques dependent on the stereo that equips your Renault Captur:
- Original car radio:
In this case, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Renault Captur. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Captur: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Renault Captur. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Renault Captur, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Captur, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Renault Captur, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Renault Captur, do not hesitate to consult our Renault Captur category.
