You’re bored with listening to cassettes and only having the capability to enjoy the radio, while your smart phone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve posted this article content to help you, because right now you’re going to find out how to install a car radio on your PORSCHE 718. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on PORSCHE 718 and at last, how to connect it.
How to install car radio on PORSCHE 718: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your PORSCHE 718, there is one important task, remove the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions determined by the stereo that equips your PORSCHE 718:
- Original car radio:
In this case, you’ll have to be patient, generally, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your PORSCHE 718. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your PORSCHE 718: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your PORSCHE 718. Ahead of time, take some time to examine the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your PORSCHE 718, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your PORSCHE 718, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on PORSCHE 718, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the PORSCHE 718, do not hesitate to consult our PORSCHE 718 category.
