You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is filled with your preferred music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s exactly why we’ve written this article content to help you, because in this article you’re going to find out how to install a car radio on your Peugeot Partner Tepee. To achieve this, first of all we will see how to remove the old car radio, then how to install a car radio on Peugeot Partner Tepee and finally, how to connect it.
How to install car radio on Peugeot Partner Tepee: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Peugeot Partner Tepee, there is one important task, take out the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two options depending on the stereo that equips your Peugeot Partner Tepee:
- Original car radio:
In this case, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Peugeot Partner Tepee. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Peugeot Partner Tepee: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Peugeot Partner Tepee. Ahead of time, spend some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Peugeot Partner Tepee, once situated, remember to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot Partner Tepee, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot Partner Tepee, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any additional questions about the Peugeot Partner Tepee, do not hesitate to consult our Peugeot Partner Tepee category.
