You’re tired of listening to cassettes and only being able to enjoy the radio, while your smart phone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s precisely why we’ve created this article to help you, because in this article you’re going to learn about how to install a car radio on your Opel Adam. To do this, first we will discover how to remove the old car radio, then how to install a car radio on Opel Adam and at last, how to connect it.
How to install car radio on Opel Adam: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Opel Adam, there is one important task, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods based on the stereo that equips your Opel Adam:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Opel Adam. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Opel Adam: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Opel Adam. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Opel Adam, once situated, remember to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Opel Adam, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Opel Adam, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Opel Adam, take a look at the Opel Adam category.
