You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your smart phone is full of your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve created this content page to help you, because now you’re going to learn about how to install a car radio on your Nissan Qashqai. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Nissan Qashqai and finally, how to connect it.
How to install car radio on Nissan Qashqai: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Nissan Qashqai, there is one essential task, remove the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions based on the stereo that equips your Nissan Qashqai:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Nissan Qashqai. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Qashqai: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Nissan Qashqai. Before you start, spend some time to verify the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Nissan Qashqai, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Qashqai, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Nissan Qashqai, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you need more tutorials on the Nissan Qashqai, go to our Nissan Qashqai category.
