You’re bored with listening to cassettes and only being able to enjoy the radio, while your smart phone is filled with your favourite tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve made this content to help you, because right now you’re going to learn about how to install a car radio on your Nissan Patrol 3. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Nissan Patrol 3 and to finish, how to connect it.
How to install car radio on Nissan Patrol 3: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Nissan Patrol 3, there is one fundamental step, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two options depending on the stereo that equips your Nissan Patrol 3:
- Original car radio:
In this instance, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Nissan Patrol 3. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the method is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Patrol 3: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Nissan Patrol 3. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Nissan Patrol 3, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Patrol 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Nissan Patrol 3, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Nissan Patrol 3, do not hesitate to consult our Nissan Patrol 3 category.
