You’re tired of listening to cassettes and only having the capability to enjoy the radio, while your smart phone is loaded with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written this content page to help you, because in this article you’re going to learn about how to install a car radio on your Mercedes Classe Glc. To get this done, first of all we will see how to remove the old car radio, then how to install a car radio on Mercedes Classe Glc and at last, how to connect it.
How to install car radio on Mercedes Classe Glc: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Mercedes Classe Glc, there is one essential task, remove the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two techniques depending on the stereo that equips your Mercedes Classe Glc:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Mercedes Classe Glc. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes Classe Glc: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Mercedes Classe Glc. Ahead of time, take some time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Mercedes Classe Glc, once situated, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Classe Glc, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Mercedes Classe Glc, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Mercedes Classe Glc, take a look at the Mercedes Classe Glc category.
