You’re bored with listening to cassettes and only having the ability to listent to the radio, while your smart phone is loaded with your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve made this article to help you, because right now you’re going to find out how to install a car radio on your hyundai i10. To get this done, first we will see how to remove the old car radio, then how to install a car radio on hyundai i10 and to finish, how to connect it.
How to install car radio on hyundai i10: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your hyundai i10, there is one imperative task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions determined by the stereo that equips your hyundai i10:
- Original car radio:
In cases like this, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your hyundai i10. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this situation the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your hyundai i10: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your hyundai i10. Ahead of time, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your hyundai i10, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your hyundai i10, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on hyundai i10, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the hyundai i10, take a look at the hyundai i10 category.
