You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s exactly why we’ve written this content to help you, because in this article you’re going to learn about how to install a car radio on your Honda Civic. To make this happen, first of all we will find out how to remove the old car radio, then how to install a car radio on Honda Civic and to finish, how to connect it.
How to install car radio on Honda Civic: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Honda Civic, there is one important task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options depending on the stereo that equips your Honda Civic:
- Original car radio:
In this case, you’ll have to be persistent, most of the time, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Honda Civic. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Honda Civic: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Honda Civic. Ahead of time, take the time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Honda Civic, once installed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Honda Civic, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Honda Civic, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If perhaps you have any further questions about the Honda Civic, do not hesitate to consult our Honda Civic category.
