You’re tired of listening to cassettes and only having the ability to listent to the radio, while your smartphone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s exactly why we’ve written and published this content to help you, because in this article you’re going to learn about how to install a car radio on your Ford Tourneo. To achieve this, initially we will find out how to remove the old car radio, then how to install a car radio on Ford Tourneo and to finish, how to connect it.
How to install car radio on Ford Tourneo: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Ford Tourneo, there is one important task, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two solutions determined by the stereo that equips your Ford Tourneo:
- Original car radio:
In this instance, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Ford Tourneo. Actually, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Tourneo: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Ford Tourneo. Ahead of time, take the time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Ford Tourneo, once installed, remember to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Tourneo, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford Tourneo, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
Whenever you have any further questions about the Ford Tourneo, do not hesitate to consult our Ford Tourneo category.
