You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve made this content to help you, because now you’re going to find out how to install a car radio on your Ford S-max. To get this done, first of all we will see how to remove the old car radio, then how to install a car radio on Ford S-max and to finish, how to connect it.
How to install car radio on Ford S-max: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Ford S-max, there is one fundamental task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions determined by the stereo that equips your Ford S-max:
- Original car radio:
In this instance, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Ford S-max. In reality, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the technique is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford S-max: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Ford S-max. Before you start, take the time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Ford S-max, once situated, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford S-max, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Ford S-max, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Ford S-max, do not hesitate to consult our Ford S-max category.
