You’re sick and tired of listening to cassettes and only being able to listent to the radio, while your phone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve posted this content page to help you, because now you’re going to find out how to install a car radio on your Fiat Doblo 2. To achieve this, first we will find out how to remove the old car radio, then how to install a car radio on Fiat Doblo 2 and finally, how to connect it.
How to install car radio on Fiat Doblo 2: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Fiat Doblo 2, there is one important task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two techniques dependent on the stereo that equips your Fiat Doblo 2:
- Original car radio:
In cases like this, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Fiat Doblo 2. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Fiat Doblo 2: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Fiat Doblo 2. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Fiat Doblo 2, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Fiat Doblo 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Fiat Doblo 2, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any additional questions about the Fiat Doblo 2, do not hesitate to consult our Fiat Doblo 2 category.
