You’re bored with listening to cassettes and only having the capability to enjoy the radio, while your smartphone is full of your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s exactly why we’ve written this content page to help you, because now you’re going to learn about how to install a car radio on your Cadillac XTS. To accomplish this, first of all we will see how to remove the old car radio, then how to install a car radio on Cadillac XTS and finally, how to connect it.
How to install car radio on Cadillac XTS: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Cadillac XTS, there is one imperative step, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two methods determined by the stereo that equips your Cadillac XTS:
- Original car radio:
In cases like this, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Cadillac XTS. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Cadillac XTS: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Cadillac XTS. Before you start, take the time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Cadillac XTS, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Cadillac XTS, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Cadillac XTS, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To discover more tips on the Cadillac XTS, take a look at the Cadillac XTS category.
