You’re tired of listening to cassettes and only having the capability to enjoy the radio, while your phone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve written this content to help you, because right now you’re going to find out how to install a car radio on your Cadillac CT6. To do this, initially we will find out how to remove the old car radio, then how to install a car radio on Cadillac CT6 and finally, how to connect it.
How to install car radio on Cadillac CT6: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Cadillac CT6, there is one essential step, take out the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions determined by the stereo that equips your Cadillac CT6:
- Original car radio:
In this case, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Cadillac CT6. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Cadillac CT6: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Cadillac CT6. Beforehand, spend some time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Cadillac CT6, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Cadillac CT6, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Cadillac CT6, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the Cadillac CT6, take a look at the Cadillac CT6 category.
