You’re bored with listening to cassettes and only being able to listent to the radio, while your phone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve written this content page to help you, because right now you’re going to find out how to install a car radio on your Audi Rs6. To do this, first of all we will see how to remove the old car radio, then how to install a car radio on Audi Rs6 and finally, how to connect it.
How to install car radio on Audi Rs6: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Audi Rs6, there is one fundamental task, remove the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is achieved, here are the two solutions based on the stereo that equips your Audi Rs6:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Audi Rs6. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is achieved, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Rs6: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Audi Rs6. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Audi Rs6, once placed, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Rs6, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi Rs6, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the Audi Rs6, take a look at the Audi Rs6 category.
