You’re bored with listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve posted this article content to help you, because in this article you’re going to learn about how to install a car radio on your Audi Rs4. To achieve this, first of all we will discover how to remove the old car radio, then how to install a car radio on Audi Rs4 and finally, how to connect it.
How to install car radio on Audi Rs4: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Audi Rs4, there is one imperative step, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two options determined by the stereo that equips your Audi Rs4:
- Original car radio:
In this instance, you’ll have to be persistent, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Audi Rs4. In fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Rs4: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Audi Rs4. Before you start, spend some time to check the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Audi Rs4, once installed, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Rs4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Audi Rs4, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you want more guides on the Audi Rs4, go to our Audi Rs4 category.
