You’re sick and tired of listening to cassettes and only having the ability to listent to the radio, while your phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve written and published this content page to help you, because now you’re going to find out how to install a car radio on your Audi Q8. To do this, first of all we will see how to remove the old car radio, then how to install a car radio on Audi Q8 and finally, how to connect it.
How to install car radio on Audi Q8: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Audi Q8, there is one essential step, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two methods determined by the stereo that equips your Audi Q8:
- Original car radio:
In this instance, you’ll have to be patient, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Audi Q8. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Audi Q8: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Audi Q8. Ahead of time, take some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Audi Q8, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Audi Q8, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Audi Q8, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Audi Q8, take a look at the Audi Q8 category.
