Regardless of you need to move house, go on vacation with a caravan, get rid of of green waste, or have a hitch is fairly handy. In this post, we will show you the electrical connection of a trailer hitch of a Nissan Pulsar . In fact, regardless if the installation procedure is not complex, it is required to clarify some points to consider this intervention without any issue. First of all, we will find out what the electrical wiring harness of your motor vehicle hitch contains, then, in a second step, how to make the electrical connection of the hitch of a Nissan Pulsar .
What’s the wiring harness for a Nissan Pulsar hitch trailer?
Why do we have to connect a wiring harness with the hitch trailer of a Nissan Pulsar?
So we will commence our article by detailing the fundamentals of a wiring harness of a Nissan Pulsar. In order to figure out how it functions, you must previously figure out its necessity. If you have a trailer or a caravan to tow, it is important and earlier all mandatory by the highway code to follow certain requirements, here they are:
- A solid chassis for the trailer…
- Wheels that fit.
- An electrical connection.
- A license plate in plain sight.
- A stoplight repeater.
- A traffic light repeater.
- A blinker repeater.
- License plate illumination.
- A fog light repeater.
In order to fulfill all the electrical obligations, you will need to install a wiring harness connection on the hitch trailer of your Nissan Pulsar . We will focus on this in this article, if you want to discover how to install the hitch of a Nissan Pulsar, please find out our article on this theme.
What is the electrical connection of the trailer hitch of a Nissan Pulsar?
We will now fairly quickly show you how the electrical connection of your hitch functions. The connection uses the 12-volt current from your motor vehicle to power the hitch lights on your Nissan Pulsar. There are two different systems of electrical connection for a hitch, here they are:
- The 7-pin electric plug for a Nissan Pulsar trailer, 7 pins : This is the classic plug that will be determined on all Nissan Pulsar hitches. This electrical connection will allow you to transmit all the lighting functions necessary for the rear signalling of your trailer, you will locate a plug for each function (left and right indicators, ground, fog light, left and right position light, left and right brake light).
- Electrical connection for caravan with 13-pin plug for Nissan Pulsar: This plug system is specifically used for caravans that necessitate 12 volts inside to supply the different electrical equipment in the cabin. This kind of connection requires the use of an adapter. The extra pins will bring the 12 volt power permanently (to recharge a battery in the caravan) and the 12 volt power in use (to use the 12 volt equipment when the car is switched on).
How do I hook up the wiring harness of a Nissan Pulsar?
To end this article, we will fairly quickly show you you how to produce the connection of the wiring harness of your Nissan Pulsar .
How to make the connection of the wiring harness of an old Nissan Pulsar?
To mount the wiring harness of an old Nissan Pulsar, you will have to go and get all the required cables in the rear lights of this one. We advise you to call in a motor vehicle electrician to do this intervention because it is complex, but we will nevertheless summarize the main steps to be accomplished:
- Remove the trunk lining from your Nissan Pulsar to access the rear light unit.
- Identify the wires that correspond to each of the taillight functions.
- Connect them to the lugs on the wiring harness on your hitch.
- Close the whole thing down.
How do you connect the wiring harness of a recent Nissan Pulsar?
For modern Nissan Pulsars, the wiring harness is much less complicated to connect:
- You can use a multiplexable box, you will locate specific ones for your Nissan Pulsar and universal models. It’s up to you to choose according to your budget, know that a universal version costs between 30 and 60 euros.
- Remove the trunk lining from your Nissan Pulsar so that you can route the cables from your box to the front of your Nissan Pulsar and connect them to your fuse box.
- Install the circumstance in the trunk properly.
- You don’t have to retrieve your cables from the trunk and connect them to your outlet.
0
How do you hook up the power to a trailer on Nissan Pulsar?
Finally, to end this article we will fairly quickly show you you how to produce the electrical connection of a caravan on your Nissan Pulsar . To achieve this you will inevitably have to go through one of the previous steps, it’s up to you to choose the one that points your model and your budget. After you have conducted this, the last step will be to buy an adapter that goes from a 7-pin plug to a 13-pin plug so that you can benefit from the 12 volt current in your caravan. These adapters come at different prices, you will need to count between 15 and 40 euros. All you have to do is plug it into your 7-pin plug.
To get more tips on the Nissan Pulsar, take a look at the Nissan Pulsar category.
