The battery of your car is a wearing part, it is most of the time considered that it will have between 5 and 6 years of life span. You may have found yourself one morning with a dead battery and not being able to start your Mitsubishi Outlander. And frequently this is a consequence of a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Mitsubishi Outlander? Precisely, our team has written this article in order to help you do this simple procedure safely. Initially, we will give you some hints and tips on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Mitsubishi Outlander.
How to disconnect the battery on my Mitsubishi Outlander: A few tips
To begin with, before dealing with how to disconnect the battery from your Mitsubishi Outlander, we will give you a few suggestions on how to do this operation securely and save you from wasting time, some of them will definitely seem evident to you, but you can never be too careful :
- Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Mitsubishi Outlander.
- The battery in your car is an energy accumulator, and can likely deliver a deadly charge to humans, so you will need to remember to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be certain you take as little risk as possible.
- In addition to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
- Finally when you go to the step how to disconnect the battery on your Mitsubishi Outlander, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.
How to disconnect a battery on my Mitsubishi Outlander: Take action
Let’s begin now, the part that definitely brings you here, how to disconnect a battery on your Mitsubishi Outlander. So, after having taken all the precautions we listed just before, you will finally be able to start the removal of the battery from your car. To do this, it will be fairly simple. First you will have to take out the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we recommend you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is done, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would trigger a short circuit. Now you can disconnect the positive terminal of the battery from your Mitsubishi Outlander. Once both terminals are disconnected, you can begin the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Be cautious though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just learned the methodology for how to disconnect a battery on your Mitsubishi Outlander, if you stick to all the safety instructions, everything should go well. If you want to find out how to safely reconnect your battery, check out this article, and if you want more information about your Mitsubishi Outlander, we have a directory of articles dedicated to your vehicle.
If you want more tutorials on the Mitsubishi Outlander, go to our Mitsubishi Outlander category.