The battery of your vehicle is a wearing part, it is most of the time considered that it will have between 5 and 6 years of life span. You may have found yourself one morning without a battery and not having the ability to turn on your Kia Sedona. And generally this is caused by a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Kia Sedona? Precisely, our team has posted this article in order to help you do this simple procedure safely. Initially, we will give you some hints and tips on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Kia Sedona.

disconnect-battery-kia-sedona

How to disconnect the battery on my Kia Sedona: A few tips

First of all, before tackling how to disconnect the battery from your Kia Sedona, we will give you a few hints on how to do this procedure safely and save you from wasting time, some of them will absolutely seem obvious to you, but you can never be too careful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to avoid any movement of the Kia Sedona.
  • The battery in your car is an energy accumulator, and can likely send out a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be sure you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical that can do a lot of damage to your skin. As a safety measure, wear rubber gloves and goggles to protect you from splashing.
  • Finally when you go to the section how to disconnect the battery on your Kia Sedona, don’t touch the two terminals of your battery, you may cause a short circuit with your body as a conductor.

How to disconnect a battery on my Kia Sedona: Take action

Let’s commence now, the part that absolutely brings you on this page, how to disconnect a battery on your Kia Sedona. So, after having taken all the measures we described just before, you will finally be able to start the removal of the battery from your car. To do this, it will be quite simple. First you will have to take off the plastic covers that protect the terminals of your battery. Check the state of your terminals, if they are oxidized or very dirty, we advise you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is carried out, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this direction as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a part of the chassis, it would cause a short circuit. Now you can disconnect the positive terminal of the battery from your Kia Sedona. Once both terminals are disconnected, you can begin the last step, disconnect the battery from the engine compartment of your car. To do this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Take care though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to avoid any acid leakage. That’s it, you have just discovered the technique for how to disconnect a battery on your Kia Sedona, if you respect all the safety instructions, everything should go well. If you want to learn how to safely reconnect your battery, check out this article, and if you want more information about your Kia Sedona, we have a directory of articles dedicated to your car.

To find more tips on the Kia Sedona, take a look at the Kia Sedona category.