The battery of your car is a wearing component, it is most of the time considered that it will have between 5 and 6 years of life. You may have found yourself one morning with a dead battery and not having the capability to start your Citroen Jumper 2. And generally this is the result of a battery that no longer stores energy. So in this instance, how do I disconnect the battery from my Citroen Jumper 2? Precisely, our team has posted this content to be able to help you perform this simple task safely. Initially, we will give you some advice on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Citroen Jumper 2.

disconnect-battery-citroen-jumper-2

How to disconnect the battery on my Citroen Jumper 2: A few tips

First of all, before tackling how to disconnect the battery from your Citroen Jumper 2, we will give you a few recommendations on how to do this operation safely and save you from wasting time, some of them will surely sound evident to you, but you can never be too mindful :

  • Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Citroen Jumper 2.
  • The battery in your car is an energy accumulator, and can potentially send out a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to make certain you take as little risk as possible.
  • Additionally to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a preventative measure, wear rubber gloves and goggles to protect you from splashing.
  • Finally when you go to the step how to disconnect the battery on your Citroen Jumper 2, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.

How to disconnect a battery on my Citroen Jumper 2: Take action

Let’s start now, the part that surely brings you on this page, how to disconnect a battery on your Citroen Jumper 2. So, after having taken all the precautions we mentioned just above, you will finally be able to start the removal of the battery from your car. To do this, it will be quite easy. First you will have to take out the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we suggest you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is completed, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Citroen Jumper 2. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To accomplish this, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Be cautious though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to steer clear of any acid leakage. That’s it, you have just discovered the methodology for how to disconnect a battery on your Citroen Jumper 2, if you respect all the safety instructions, everything should go well. If you want to learn how to safely reconnect your battery, check out this content, and if you want more information about your Citroen Jumper 2, we have a directory of articles dedicated to your automobile.

In the event that you have any further questions about the Citroen Jumper 2, do not hesitate to consult our Citroen Jumper 2 category.