The battery of your car is a wearing part, it is generally considered that it will have between 5 and 6 years of life. You may have found yourself one morning with a dead battery and not having the capability to start your Chevrolet Trax. And often times this is the result of a battery that no longer stores energy. So in cases like this, how do I disconnect the battery from my Chevrolet Trax? Precisely, our team has made this content page in order to help you perform this simple procedure safely and securely. Initially, we will give you some suggestions on how to do it safely, and then we will put it into practice and how to disconnect the battery on your Chevrolet Trax.
How to disconnect the battery on my Chevrolet Trax: A few tips
To begin with, before tackling how to disconnect the battery from your Chevrolet Trax, we will give you a few tips on how to do this process safely and save you from wasting time, some of them will definitely seem evident to you, but you can never be too careful :
- Before doing anything on your car, you must always place it on a flat surface with the hand brake on to prevent any movement of the Chevrolet Trax.
- The battery in your car is an energy accumulator, and can likely deliver a deadly charge to humans, so you will need to keep in mind to turn off your vehicle’s ignition and remove any jewelry or metal objects you may be wearing to be sure you take as little risk as possible.
- Furthermore to being filled with energy, the battery will be filled with acid, a very corrosive chemical substance that can do a lot of damage to your skin. As a precaution, wear rubber gloves and goggles to protect you from splashing.
- At last when you go to the step how to disconnect the battery on your Chevrolet Trax, don’t touch the two terminals of your battery, you might cause a short circuit with your body as a conductor.
How to disconnect a battery on my Chevrolet Trax: Take action
Let’s commence now, the section that definitely brings you in this article, how to disconnect a battery on your Chevrolet Trax. So, after having taken all the safety measures we detailed just above, you will finally be able to start the removal of the battery from your car. For this, it will be very simple. First you will have to take out the plastic covers that protect the terminals of your battery. Observe the state of your terminals, if they are oxidized or very dirty, we recommend you to use a soft wire brush and baking soda to clean them before disassembling. Once the cleaning is conducted, you will first have to remove the negative battery terminal of your car using a nut and bolt (this is the black cable with a “-” sign), always in this way as it is attached to the car chassis, if you first remove the positive terminal (red cable with a “+” sign) and touch a portion of the chassis, it would bring about a short circuit. Now you can disconnect the positive terminal of the battery from your Chevrolet Trax. Once both terminals are disconnected, you can commence the last step, disconnect the battery from the engine compartment of your car. To do so, you just have to remove the rod and the clamp, commonly held by a nut or a torx bolt, and take it out of its place. Be careful though, a battery weighs very heavy, be careful and forceful, and also think about take it out vertically to prevent any acid leakage. That’s it, you have just discovered the technique for how to disconnect a battery on your Chevrolet Trax, if you stick to all the safety guidelines, everything should go well. If you want to learn how to safely reconnect your battery, check out this content page, and if you want more information about your Chevrolet Trax, we have a directory of articles dedicated to your car.
If you wish more guides on the Chevrolet Trax, go to our Chevrolet Trax category.