How to disable the immobiliser Volvo V50 ?

Your Volvo V50 doesn’t start anymore? Have you analyzed everything? Battery, alternator, spare keys… And you feel like the trouble emanates from your immobiliser ? It is certainly plausible, actually that it is in question if your automotive no longer wants to start or stalls when starting without a reason. You want to disable the immobiliser on your Volvo V50 ? You are in the right place, we have created this content to help you see more clearly and solve your problems connected to this component. First, we will see how the immobiliser works on your Volvo V50, then the different techniques to disable it.

How your immobiliser system works on Volvo V50

Before explaining the different choices available to you, here is a short introduction to describe the goal and functions of the immobilizer in your Volvo V50. This electronic element appeared 30 years ago and intends to prevent the theft of your Volvo V50. Actually, thanks to a transponder and an antenna (coil) included in the key, and, a immobilisation control box included in the ECU and a reception antenna on the neiman, your Volvo V50 will go each time you place the key in the ignition, it controls that the code emitted by your key is actually the one required by your immobilization box. It is only at this instant, that it will allow you to turn on your car. It is thanks to RFID technology (chip in the key) that this device will work.

First process, your key no longer permits your Volvo V50 to start, you want to turn off the immobiliser of your Volvo V50, but first of all you should try this procedure to start it and take it to a garage examine that you can not perform a less important operation to reestablish the normal start of your automobile. Actually, with your automobile you should have a spare key (which you should try and which should start your Volvo V50), but if you don’t have it you should at least have the “code card”, it includes the start code. Thanks to this code, you will still be able to start your automobile by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, duplicate the operation until you have entered the full code. This should enable you to start your Volvo V50 without having to remove the immobiliser.

Repair your key at a key specialist or your dealer

If despite a battery swap, different attempts to enter the immobiliser code on your Volvo V50 still doesn’t want to start, it’s almost certainly your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Volvo V50. Actually, your transponder must have been injured or must have fallen off your key. To fix this trouble, only solution, go to a key specialist (also available on the internet) or, at your dealer who can restore your Volvo V50 key. Determined by who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your dealer if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Volvo V50.

Manually remove your immobilizer

Although you may be attracted to bypass the immobilizer from your Volvo V50, this is not advised at all for many reasons. First your Volvo V50 would be much more vulnerable to theft attempts. Actually, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. In addition to that, your insurance, in case of theft most likely won’t refund you if it acknowledges that the immobiliser on your Volvo V50 has been removed, bypassed or deactivated. This if you still want to do it, some websites online still give the technique, we have made the choice not to disclose it, because it could benefit people with bad intentions.

To discover more tips on the Volvo V50, take a look at the Volvo V50 category.