How to disable the immobiliser Nissan Juke ?

Your Nissan Juke doesn’t start anymore? Have you tested everything? Battery, alternator, spare keys… And you have the feeling that the issue comes from your immobiliser ? It is actually quite plausible, indeed that it is in question if your car no longer wants to start or stalls when starting for no reason. You want to disable the immobiliser on your Nissan Juke ? You are on the good article, we have written this article to help you see more clearly and fix your trouble linked to this part. First, we will see how the immobiliser works on your Nissan Juke, then the different techniques to disable it.

How your immobiliser system works on Nissan Juke

Before describing the different alternatives available to you, here is a short introduction to demonstrate the goal and functions of the immobilizer in your Nissan Juke. This electronic element came out 30 years ago and intends to prevent the theft of your Nissan Juke. In fact, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Nissan Juke will go each time you insert the key in the ignition, it checks that the code emitted by your key is indeed the one asked by your immobilization box. It is only at this moment, that it will allow you to turn on your car. It is thanks to RFID technology (chip in the key) that this system will work.

First technique, your key no longer enables your Nissan Juke to start, you want to disable the immobiliser of your Nissan Juke, but first of all you should try this technique to start it and take it to a mechanic verify that you can not accomplish a less significant process to reestablish the normal start of your automobile. In fact, with your automobile you should have a spare key (which you should try and which should start your Nissan Juke), but if you don’t have it you should at least have the “code card”, it contains the start code. Thanks to this code, you will still be able to start your automobile by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, repeat the process until you have entered the full code. This should allow your Nissan Juke to start without having to remove the immobiliser.

Fix your key at a key specialist or your car dealer

If in spite of a battery swap, several attempts to enter the immobiliser code on your Nissan Juke still doesn’t want to start, it’s likely your key that’s at issue. We can understand that you still want to bypass the immobiliser device from your Nissan Juke. In fact, your transponder must have been weakened or must have fallen off your key. To correct this issue, only solution, go to a key specialist (also available on the internet) or, at your car dealership who can fix your Nissan Juke key. Determined by who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealership if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Nissan Juke.

Manually remove your immobilizer

Although you may be tempted to bypass the immobilizer from your Nissan Juke, this is not advised at all for many reasons. First your Nissan Juke would be much more vulnerable to theft attempts. In fact, without an immobiliser box, simply doing “the wires” may be enough to start it. In addition to that, your insurance, in case of theft most likely won’t refund you if it finds out that the immobiliser on your Nissan Juke has been removed, bypassed or deactivated. This if you still want to do it, some internet pages still give the technique, we have made the choice not to disclose it, because it could help people with bad intentions.

To get more tips on the Nissan Juke, take a look at the Nissan Juke category.