How to disable the immobiliser Honda E ?

Your Honda E doesn’t want to start? Have you analyzed everything? Battery, alternator, spare keys… And you feel like the problem originates from your immobiliser ? It is reasonably plausible, in fact that it is in question if your car doesn’t want to start anymore or stalls when starting for no reason. You want to disable the immobiliser on your Honda E ? You are in the right place, we have written this content to support you see more clearly and solve your concerns connected to this element. First, we will see how the immobiliser functions on your Honda E, then the different ways to disable it.

How your immobiliser system functions on Honda E

Before describing the different solutions available to you, here is a short introduction to show you the role and operation of the immobilizer in your Honda E. This electronic element came out 30 years ago and intends to prevent the theft of your Honda E. Actually, thanks to a transponder and an antenna (coil) integrated in the key, and, a immobilisation control box integrated in the ECU and a reception antenna on the neiman, your Honda E will go each time you place the key in the ignition, it checks that the code emitted by your key is in fact the one expected by your immobilization box. It is only at this moment, that it will let you turn on your car. It is thanks to RFID technology (chip in the key) that this unit will work.

First technique, your key no longer permits your Honda E to start, you want to disable the immobiliser of your Honda E, but first of all you should try this procedure to start it and take it to a garage check that you can not perform a less important process to restore the normal start of your automobile. Actually, with your automobile you should have a spare key (which you should try and which should start your Honda E), but if you don’t have it you should at least have the “code card”, it includes the start code. Thanks to this code, you will still be able to start your automobile by entering it manually. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to confirm the digit and resume, replicate the process until you have entered the full code. This should let you start your Honda E without having to remove the immobiliser.

Fix your key at a key specialist or your dealer

If despite a battery change, different attempts to enter the immobiliser code on your Honda E still doesn’t work, it’s most likely your key that’s at issue. We can understand that you still want to bypass the immobiliser system from your Honda E. Actually, your transponder must have been affected or must have fallen off your key. To resolve this problem, only solution, go to a key specialist (also available on the internet) or, at your car dealership who can restore your Honda E key. Determined by who you go to the repair should cost you about 100 euros if you still have a duplicate or your “code card” and about 350 euros at your car dealership if you have no support and you want a new functional key, it will avoid you having to remove the immobilizer from your Honda E.

Manually remove your immobilizer

Although you may be attracted to bypass the immobilizer from your Honda E, this is not recommended at all for many reasons. First your Honda E would be much more vulnerable to theft attempts. Actually, without an immobiliser box, simply doing “the wires” may be enough to turn your car on. In addition to that, your insurance, in case of theft most likely won’t refund you if it realizes that the immobiliser on your Honda E has been removed, bypassed or deactivated. This if you still want to do it, some sites still give the technique, we have made the choice not to disclose it, because it could help people with bad intentions.

If perhaps you have any additional questions about the Honda E, do not hesitate to consult our Honda E category.