More and more drivers are trying to maintain their cars by themselves. This results in substantial savings because contemporary cars require more and more maintenance and are done up of more and more technical components that lead to new breakdowns or inconveniences. One of the complications that disturbs more and more Hyundai Bayon owners is a clogged air flow meter, which will end in a loss of power and black exhaust fumes. Today we are going to take a look at how to clean the mass air flow sensor of your Hyundai Bayon? . First, we will explain how your mass airflow sensor operates and its advantages, second, why it might be important to clean this sensor , and finally, how to clean the mass air flow sensor of a Hyundai Bayon .
Utility and action of the mass air flow meter of a Hyundai Bayon
.
So we begin our content with the procedure and aim of your Hyundai Bayon flowmeter.
The goal of the mass air flow sensor on Hyundai Bayon
The mass air flow sensor is a part that has been developed quite not too long ago and mainly equipped on diesel models. In truth, with injection engines, the fuel and air intake has become very precise and it is consequently necessary for the ECU to know the exact volume of air injected into the engine to change the actions of complementary intake parts such as the injection or the EGR valve, if you have problems with the EGR valve on your Hyundai Bayon, do not think twice to consult our content on this subject.
Mass air flow sensor operation on Hyundai Bayon
Now, we are going to look at how it operates, before trying to clean the mass air flow sensor of your Hyundai Bayon , you must already find out how it functions to do this maintenance work accurately.
The mass air flow sensor is consequently mainly there to get data on the air intake of your motor vehicle. To get this done, it must be mounted just after the air intake of your Hyundai Bayon, i. e. just after the air filter. It is a pipe equipped with a sensor that will review the air in the intake and transmit the data to the ECU of your car.
Why clean the mass air flow sensor of a Hyundai Bayon?
The mass air flow sensor of your Hyundai Bayon can have complications and this is what we will try to discover and figure out what complications you might be struggling with!
Mass air flow sensor complications Hyundai Bayon
Here are the different complications that the air flow sensor of your Hyundai Bayon can provoke:
- higher fuel consumption: Because a dirty flow meter will actually end up in more significant fuel consumption caused by poor air flow…
- Power loss: Associated with similar issue, this lack of air can provoke a loss of power to your engine.
- Difficulties starting the car: Finally, one of the last classic complications linked to a dirty flowmeter will be that your Hyundai Bayon will have more issues to begin the car.
How do I clean the mass air flow sensor from a Hyundai Bayon?
After looking at the operation and concerns that the flowmeter can provoke, we will look at how to solve these complications by showing to you how to clean the mass air flow sensor of your Hyundai Bayon . You should know that this operation is quite basic to execute and you will not need advanced mechanical expertise to do it your self, a good technique to avoid a trip to the workshop and a steep bill. See down below the different steps to follow to execute this maintenance act:
- After having based the mass air flow sensor of your Hyundai Bayon , you will have to dismantle it. To get this done, work delicately, but you will just have to disassemble it on both sides of the air duct and disconnect the electrical plug on top of it.
- Once disassembled, you will have the ability to proceed to the step cleaning the mass air flow sensor of your Hyundai Bayon . This sensor will, over time, get dirty and its two “filaments” that will give information to your computer on the quality and temperature of the air will no longer have the ability to collect data accurately, it is in this sense that it will affect the operation of the engine of your Hyundai Bayon. The goal of this cleaning will be to remove all its impurities to enable it to work efficiently again.
- Let soak the lower part of your mass air flow sensor (not the plug part) in acetone or another solvent for a few minutes , which will remove most of the grime
- Now we’ll proceed to the very gentle cleaning of the flow meter filaments. You have to be very watchful, in any other case your mass air flow sensor will be permanently broken. With the help of a fine brush and solvent, delicately clean the two filaments of your mass air flow sensor . If you are too afraid of damaging it, you can also clean them with a brake fluid in the form of an aerosol by spraying the jet on these filaments.
.
Now you know how to clean the mass air flow sensor of your Hyundai Bayon , you should feel a noticeable difference in the behavior of your engine.
If you want more tutorials on the Hyundai Bayon, go to our Hyundai Bayon category.
