Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Volkswagen Polo 6 is one of the great classics. Even though this act is simple to do, some of you are probably attempting to find why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Volkswagen Polo 6? We will now answer these questions.
Benefit to always have the brake fluid level up in your Volkswagen Polo 6
So we commence our article content with the benefit of looking at the brake fluid level on a Volkswagen Polo 6. This fluid has a fundamental role on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is consequently imperative to check the brake fluid level of your Volkswagen Polo 6 on a regular basis (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This process is particularly simple and does not require advanced knowledge of mechanics, so it is easy for all Volkswagen Polo 6 owners to do it on their own. If the Brake light on the dashboard of your Volkswagen Polo 6 does not match to a lack of brake fluid, do not think twice to seek advice from our article content for details. Nevertheless, there are some safety measures and rules to respect that we will see in the following part of this article content.
How to fill up the brake fluid of a Volkswagen Polo 6
So now we will describe to you how to do the brake fluid level on a Volkswagen Polo 6. Please take note that this is very elementary to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Volkswagen Polo 6. Now here are the steps to follow to make your level:
- Open your hood and find your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
- Once established, examine the instructions on the cap carefully so as not to make any mistakes within the the process, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Volkswagen Polo 6 up to the mark “Max”.
- If the level was below the “Min” mark before you examined the brake fluid level in your Volkswagen Polo 6, remember to check the level in a few days/weeks to make sure you don’t have a leak in the brake system
.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Volkswagen Polo 6.
To get more tips on the Volkswagen Polo 6, take a look at the Volkswagen Polo 6 category.
