Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Volkswagen Caddy 3 is one of the great classics. Even though this work is very easy to perform, some of you are most likely trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Volkswagen Caddy 3? We will now answer these questions.
Advantage to always have the brake fluid level up in your Volkswagen Caddy 3
So we start our article with the interest of looking at the brake fluid level on a Volkswagen Caddy 3. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is therefore important to verify the brake fluid level of your Volkswagen Caddy 3 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its properties. This operation is specially simple and does not require advanced expertise of mechanics, so it is easy for all Volkswagen Caddy 3 owners to do it on their own. If the Brake light on the dashboard of your Volkswagen Caddy 3 does not match to a lack of brake fluid, do not hesitate to seek advice from our article for details. However, there are some precautions and rules to respect that we will check out in the following section of this article.
How to fill up the brake fluid of a Volkswagen Caddy 3
So now we will show to you how to do the brake fluid level on a Volkswagen Caddy 3. Please note that this is very elementary to perform. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this data in the user manual of your Volkswagen Caddy 3. Now here are the steps to stick to to make your level:
- Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is generally made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
- Once discovered, read the instructions on the cap attentively so as not to make any problems within the the operation, we recommend you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Volkswagen Caddy 3 up to the mark “Max”.
- If the level was under the “Min” mark before you checked the brake fluid level in your Volkswagen Caddy 3, make sure you verify the level in a few days/weeks to be certain you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Volkswagen Caddy 3.
If you have any additional questions about the Volkswagen Caddy 3, do not hesitate to consult our Volkswagen Caddy 3 category.
