Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Toyota Yaris is one of the great classics. Even though this action is elementary to conduct, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Toyota Yaris? We will now answer these questions.

check-brake-fluid-level-toyota-yaris

Advantage to always have the brake fluid level up in your Toyota Yaris

So we start our article with the benefit of checking the brake fluid level on a Toyota Yaris. This fluid has an essential role on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently imperative to verify the brake fluid level of your Toyota Yaris regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its properties. This process is extremely simple and does not require amazing knowledge of mechanics, so it is easy for all Toyota Yaris owners to do it on their own. If the Brake light on the dashboard of your Toyota Yaris does not correspond to a lack of brake fluid, do not think twice to read our article for details. Nevertheless, there are some safety measures and rules to respect that we will check out in the following section of this article.

How to fill up the brake fluid of a Toyota Yaris

So now we will explain to you how to do the brake fluid level on a Toyota Yaris. Please take note that this is very basic to do. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Toyota Yaris. Now here are the steps to follow to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once found, examine the instructions on the cap carefully so as not to make any mistakes during the process, we advise you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota Yaris up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Toyota Yaris, make sure you verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Toyota Yaris.

If you wish more tutorials on the Toyota Yaris, go to our Toyota Yaris category.