Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Toyota FJ Cruiser is one of the most classics. Nevertheless this action is very easy to complete, some of you are most likely questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Toyota FJ Cruiser? We will now answer these questions.

check-brake-fluid-level-toyota-fj-cruiser

Benefit to always have the brake fluid level up in your Toyota FJ Cruiser

So we commence our article with the interest of checking the brake fluid level on a Toyota FJ Cruiser. This fluid has an essential function on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that with time you may lose brake fluid without any particular leak (without any leakage). It is therefore fundamental to check the brake fluid level of your Toyota FJ Cruiser regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its features. This procedure is really simple and does not require evolved expertise of mechanics, so it is easy for all Toyota FJ Cruiser owners to do it themselves. If the Brake light on the dashboard of your Toyota FJ Cruiser does not correspond to a lack of brake fluid, do not be reluctant to browse our article for details. Nevertheless, there are some safety measures and rules to respect that we will see in the following part of this article.

How to fill up the brake fluid of a Toyota FJ Cruiser

So now we will explain to you how to do the brake fluid level on a Toyota FJ Cruiser. Please notice that this is very elementary to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this information in the user manual of your Toyota FJ Cruiser. Now here are the steps to follow to make your level:

  • Open your hood and situate your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once identified, browse the instructions on the cap attentively so as not to make any mistakes within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Toyota FJ Cruiser up to the mark “Max”.
  • If the level was beneath the “Min” mark before you checked the brake fluid level in your Toyota FJ Cruiser, be sure to check the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to securely fill the brake fluid level of your Toyota FJ Cruiser.

To get more tips on the Toyota FJ Cruiser, take a look at the Toyota FJ Cruiser category.