Among the small maintenance acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Suzuki Alto is one of the most classics. Nevertheless this process is very easy to complete, some of you are most probably attempting to find why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Suzuki Alto? We will now answer these questions.

check-brake-fluid-level-suzuki-alto

Advantage to always have the brake fluid level up in your Suzuki Alto

So we start our guideline with the significance of checking the brake fluid level on a Suzuki Alto. This fluid has an essential task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is consequently necessary to examine the brake fluid level of your Suzuki Alto regularly (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid will lose its attributes. This procedure is particularly simple and does not require evolved experience of mechanics, so it is easy for all Suzuki Alto owners to do it themselves. If the Brake light on the dashboard of your Suzuki Alto does not correspond to a lack of brake fluid, do not hesitate to consult our guideline for details. However, there are some precautions and rules to follow that we will see in the up coming section of this guideline.

How to fill up the brake fluid of a Suzuki Alto

So now we will describe to you how to do the brake fluid level on a Suzuki Alto. Please be aware that this is very basic to perform. However, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this info in the user manual of your Suzuki Alto. Now here are the steps to adhere to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
  • Once identified, read the instructions on the cap mindfully so as not to make any mistakes within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Suzuki Alto up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Suzuki Alto, remember to examine the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely and securely fill the brake fluid level of your Suzuki Alto.

If you want more guides on the Suzuki Alto, go to our Suzuki Alto category.