Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your saab 9 3 is one of the great classics. Even though this work is very easy to do, some of you are probably questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your saab 9 3? We will now answer these questions.

check-brake-fluid-level-saab-9-3

Advantage to always have the brake fluid level up in your saab 9 3

So we start our article content with the significance of checking the brake fluid level on a saab 9 3. This fluid has a vital task on your car, transmit the braking power to the wheels and thus stop your vehicle. On the other hand, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is as a result fundamental to verify the brake fluid level of your saab 9 3 often (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its properties. This process is particularly simple and does not require advanced experience of mechanics, so it is easy for all saab 9 3 owners to do it on their own. If the Brake light on the dashboard of your saab 9 3 does not match to a lack of brake fluid, do not hesitate to consult our article content for details. On the other hand, there are some safety measures and rules to respect that we will discover in the next part of this article content.

How to fill up the brake fluid of a saab 9 3

So now we will show to you how to do the brake fluid level on a saab 9 3. Please note that this is very simple to perform. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this data in the user manual of your saab 9 3. Now here are the steps to follow to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to locate, it is usually made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, examine the instructions on the cap attentively so as not to make any mistakes during the process, we suggest you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your saab 9 3 up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your saab 9 3, make sure to verify the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely fill the brake fluid level of your saab 9 3.

Whenever you have any further questions about the saab 9 3, do not hesitate to consult our saab 9 3 category.