Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Nissan Patrol 3 is one of the great classics. Nevertheless this process is basic to do, some of you are likely trying to figure out why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Nissan Patrol 3? We will now answer these questions.

check-brake-fluid-level-nissan-patrol-3

Advantage to always have the brake fluid level up in your Nissan Patrol 3

So we start our article with the interest of looking at the brake fluid level on a Nissan Patrol 3. This fluid has a crucial role on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is as a result essential to examine the brake fluid level of your Nissan Patrol 3 regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its characteristics. This operation is particularly simple and does not require advanced expertise of mechanics, so it is easy for all Nissan Patrol 3 owners to do it themselves. If the Brake light on the dashboard of your Nissan Patrol 3 does not match to a lack of brake fluid, do not hesitate to read our article for details. Nevertheless, there are some measures and rules to respect that we will notice in the next part of this article.

How to fill up the brake fluid of a Nissan Patrol 3

So now we will describe to you how to do the brake fluid level on a Nissan Patrol 3. Please take note that this is very basic to do. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Nissan Patrol 3. Now here are the steps to adhere to to make your level:

  • Open your bonnet and find your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is placed above the master cylinder (metal part) and has a yellow cap.
  • Once identified, read the instructions on the cap carefully so as not to make any problems during the operation, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Nissan Patrol 3 up to the mark “Max”.
  • If the level was below the “Min” mark before you checked the brake fluid level in your Nissan Patrol 3, make sure examine the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to safely fill the brake fluid level of your Nissan Patrol 3.

If perhaps you have any additional questions about the Nissan Patrol 3, do not hesitate to consult our Nissan Patrol 3 category.